Sheffield Based- Since 2008.

Unless stated all items are OO Gauge (1:76)
(+44) 0114 3216 160.
(+44) 0114 2647 449.
         0 755 7126 651.
Email: support@oliviastrains.com
Skype Us
Mon - Fri- 09:00 - 17:00 / Sat- 09:00 - 16:00.

Olivia’s ESU V4 Diesel & Electric Sound Functions.

Click HERE for the volume control CV’s.

From 4th July 2018

We have updated our Sound Functions we have taken into account our customers issues with our Sound & Auxiliary commands such as F5 & F6. we have moved all Auxiliary commands to single actions using F17/18/19&20 this will cause lots of problems for our customers with the Lower End market controllers but we can personalise these on request. We are happy to explain this in detail (ask for Neil)

We now have our own personalised ESU 54-499 that is idea for 6 Auxiliary commands this is idea for the Dapol range that requires this to operate even the internal lighting on the Class 121/122 the Halo lights on the Class 68 by using this version it allows us to give you these 2 additional Auxiliary commands These are + £2 no additional charge when using our Fitting services

Olivia’s Trains ESU V4 Diesel Sound Function List .  
Functions:
F0: Head/ Tail Lights. (Look at our Tail Light Mod)**
F1: Sound On/Off.
F2: High Horn.
F3: Low Horn.
F4: Air Release.
F05:  Buffer Clash
F06:  Coupling
F07:  Cab Door Slam.
F08:  Despatch Whistle.
F09:  Driver Acknowledgement.
F10:  Flange Squeal.*
F11:  Compressor.
F12:  Air Cylinder Drain Valve/ Pop.
F13:  Rail Clack.*
F14:  Notch Up.
using this commands locks the sound volume and is the most common cause customers think the Decoder is not working correctly
F15:  Notch Down.
using this commands locks the sound volume and is the most common cause customers think the Decoder is not working correctly

F16:  Fade Out/In Sound

F17:  Standard Cab Lighting (Certain Bachmann Models) Operates both Cab lights On/Off
F18:  Separate Cab Lighting Mod (Using our Cab Lighting Options)
F19: Tail Light Operation No 2 End. (Tail Light Mod)**
F20: Tail Light Operation No 1 End. (Tail Light Mod)**  Normally No1 End is the Radiator End

* These are speed dependant and require the Loco needs to be moving, Flange squeal only sounds at low speed (15MPH).

** These Commands can be swapped to alternative Function Buttons on Request

Pre- 4 July 2018

Diesel & Electric Sound Functions.

F00:  Directional Lights.
F01:  Start Up/Shut Down.
F02:  Horn.
F03:  Horn.
F04:  Brake Release.
F05:  Buffer Clash/ Tail Light Mod/Cab Light  Aux 1.
F06:  Coupling/ Tail Light Mod/Cab Light Aux 2.
F07:  Cab Door Slam.
F08:  Despatch Whistle.
F09:  Driver Acknowledgement.
F10:  Flange Squeal.*
F11:  Compressor.
F12:  Air Cylinder Drain Valve/ Pop.
F13:  Rail Clack.*
F14:  Notching  Up.**
F15:  Notching Down.**
F16:  Fade Out/In Sound

* F10 & F13 are only speed dependent.

** If using these commands you must understand that once pressed. The Loco will Rev up/Down to Max unless turned off. Once turned of it will rev at the setting you have selected, once Notched down to Idling & turned off. You can then control the reving using the speed settings. This is the most common cause for your Loco not operating as you expect.

If you press Notch up & Notch Down at the same time you totally confuse the Decoder as you are giving it 2 totally opposit commands.

Click Here To Order.
Tel: 0114 3216 160 Or 0114 2647 449.