Olivia’s Blue Pullman Sound Functions.
Click HERE for the volume control CV’s.
Blue Pullman V5 Sound Functions
F0:- Head/ Tail Lights Plus Interior lighting
F1:- Engine Start Up/Shut Down Delayed start up on coach F
F2:- High Tone Horn. Directional
F3:- Low Tone Horn. Directional
F4:- Brakes Releasing.
F5:- On = Door slam Sequence then Dispatch whistle – Turn Off = Driver/guard Buzzer
F6:- Cab 1
F7:- Cab 2
F8:- On = Drivers cab door open – Off = Drivers cab door closed
F9:- Kings cross to Edenborough Announcement
F10:- Edenborough to Kings cross Announcement
F11:- On Engine Running = Compressor. On Engine Shut Down =Air Cylinder Drain Valve/ Pop
F12:- Drive Hold. ( Old Notch up/Down) See a further explanation Below***
F13:- Rail Clack.*
F14:- Table lights.
F15:- Flange squeal.*
F16:- On=Fade Out (reduces sound Doppler effect to 25% Volume) Off=Back to normal setting
F17:- Brake 1 Option (Slows Loco down 50% Quicker) without using Speed Controller
F18:- Brake 2 Option (Slows Loco down 65% Quicker) without using Speed Controller
F19:- Brake 3 Option (Slows Loco down 85% Quicker) without using Speed Controller
* Flange Squeal only operates at low speed turns off over 15mph
*** Drive Hold this replaces notching up & down which was quite hard for us to explain & Locked the Engine rev. Using Drive Hold Press F12 Nothing will happen until you select the speed you require. Still the Loco will not move until you turn off F12 the trick using this is to turn this off before MAX Revs are reached, if not the Loco revs will decrease back to idle. Once the Loco has set off you can increase the speed & engine revs as normal
Tel: 0114 3216 160 Or 0114 2647 449.