Hornby R1230. HST Starter Set GWR (Railroad)
Hornby R1230. Class 43 HST Starter Train Set
“GWR High Speed Train”
In GWR Livery.
Pre-Order! Due Autumn 2019
£120 – Analogue.
£176 – 2x Std Decoders Fitted – Both Units.
£240 – Twin TTS Fitted
£284 – ESU V5 Olivia’s Single Sound Fitted – DCC In Dummy.
£392 – ESU V5 Olivia’s Twin Sound Fitted.
Additional DCC Options:
£ 50 – Directional Working Lights
£ 7 – Cab Light (Per Cab)
£ 3 – Driver Fitted (Per Car if Cab Light fitted)
- Three Car Railroad Class 43 HST set (Power car, Dummy Power car with Standard Open Coach) in GWR Green
- Third radius starter oval with Track Pack A – measures 1550mm x 1130mm
- Train Controller, transformer and 13A UK wall plug
- Hornby Midimat Trakmat
- Re-railing tool
Olivia’s Trains Class 43 HST V5 Sound Functions Paxman or MTU Option
F0:- Front / Tail Lights. Directional
F1:- Power Car Engine Start Up/Shut Down
F2:- High Tone Horn.
F3:- Low Tone Horn.
F4:- Brakes Releasing.
F5:- On = Train Doors Slamming Dispatch Whistle – Turn Off = Guard to Driver right away Driver Replies
F6:- Regional Station Announcements
F7:- Regional Station Announcements
F8:- Cab Door Slam.
F9:- Coach Wail
F10:- Flange Squeal.*
F11:- On Engine Running = Compressor. On Engine Shut Down =Air Cylinder Drain Valve/ Pop
F12:- Drive Hold. ( Old Notch up/Down) See a further explanation Below***
F13:- Rail Clack.*
F14:- No 1 End Cab Light (Power Car)
F15:- No 2 End Cab Light (Dummy Car)
F16:- On=Fade Out (reduces sound Doppler effect to 25% Volume) Off=Back to normal setting
F17:- Brake 1 Option (Slows Loco down 50% Quicker) without using Speed Controller
F18:- Brake 2 Option (Slows Loco down 65% Quicker) without using Speed Controller
F19:- Brake 3 Option (Slows Loco down 85% Quicker) without using Speed Controller
F20:- Dummy Car Engine Start Up/Shut Down
* Flange Squeal only operates at low speed turns off over 15mph
*** Drive Hold this replaces notching up & down which was quite hard for us to explain & Locked the Engine rev. Using Drive Hold Press F12 Nothing will happen until you select the speed you require. Still the Loco will not move until you turn off F12 the trick using this is to turn this off before MAX Revs are reached, if not the Loco revs will decrease back to idle. Once the Loco has set off you can increase the speed & engine revs as normal
Weight Bracket= 1.0 – 1.25Kg Postage Options Click Here.
Tel: 0114 3216 160 Or 0114 2647 449.