Bachmann 30-425. Midland Pullman 6-Car Set
Bachmann 30-425. Midland Pullman
6- Car Set
In Nanking Blue Livery.
- Six-car Midland Pullman train
- Exclusive bound history of the Midland Pullman
- Pack of Scenecraft Midland Pullman stewards & crew figures
- Collectable reproduction menu card
- Fine art print of the Midland Pullman
In Stock Ready to Order
£600 – Analogue
£750 – Twin Zimo Sound Fitted
£800 – Olivia’s ESU V5 Twin Sound Fitted.
£ 12 – P&P Parcel 48 (Parcelforce.)
Personalise Your Blue Pullman.
Our Twin Sound is a Must and you require 2x Sound Decoders because a Sound decoder will only run well with another Sound decoder. Both Power Cars A & F have different recording of our own thoughts of what this Unit would sound like. You control both decoders by using 1 address & Playable horns on both Power Cars & only operate in Forward direction. New features to the V5 ESU sound decoders
Blue Pullman ESU V5 Sound Functions
F0:- Head/ Tail Lights Plus Interior lighting
F1:- Engine Start Up/Shut Down Delayed start up on coach F
F2:- High Tone Horn. Directional
F3:- Low Tone Horn. Directional
F4:- Brakes Releasing.
F5:- On = Door slam Sequence then Dispatch whistle – Turn Off = Driver/guard Buzzer
F6:- Cab 1
F7:- Cab 2
F8:- On = Drivers cab door open – Off = Drivers cab door closed
F11:- On Engine Running = Compressor. On Engine Shut Down =Air Cylinder Drain Valve/ Pop
F12:- Drive Hold. ( Old Notch up/Down) See a further explanation Below***
F13:- Rail Clack.*
F14:- Table lights.
F15:- Flange squeal.*
F16:- On=Fade Out (reduces sound Doppler effect to 25% Volume) Off=Back to normal setting
F17:- Brake 1 Option (Slows Loco down 50% Quicker) without using Speed Controller
F18:- Brake 2 Option (Slows Loco down 65% Quicker) without using Speed Controller
F19:- Brake 3 Option (Slows Loco down 85% Quicker) without using Speed Controller
* Flange Squeal only operates at low speed turns off over 15mph
*** Drive Hold this replaces notching up & down which was quite hard for us to explain & Locked the Engine rev. Using Drive Hold Press F12 Nothing will happen until you select the speed you require. Still the Loco will not move until you turn off F12 the trick using this is to turn this off before MAX Revs are reached, if not the Loco revs will decrease back to idle. Once the Loco has set off you can increase the speed & engine revs as normal
Tel: 0114 3216 160 Or 0114 2647 449.