Sheffield Based- Since 2008.

Unless stated all items are OO Gauge (1:76)
(+44) 0114 3216 160.
(+44) 0114 2647 449.
         0 755 7126 651.
Email: support@oliviastrains.com
Skype Us
Mon - Fri- 09:00 - 17:00 / Sat- 09:00 - 16:00.

Bachmann 32-650 D1 “Scafell Pike” BR Green

Bachmann 32-650 Class 44
D1 “Scafell Pike”
In BR Green Livery.

Pre-owned Model in Excellent Boxed Condition
Fitted with Directional Lights Functional Tail Lights

In Stock Ready to Order

Locomotive Prices:
£165 – Analogue.
£218 – 8 Pin Std Decoder Fitted

£301 – ESU V5 Olivia’s Sound Fitted.

Additional Work Available.
£  7 –  Cab Light (Per Cab) 

£45 – ESU Stay Alive Fitted

Olivia’s Trains ESU V5 Sound Function List For Class 44 Locomotives.
March  2019

Function Commands:
F0:- Working Dics Lights. (Look at our Tail Light Mod)**
F1:- Engine Start Up/Shut Down. 
F2:- High Tone Horn.
F3:- Low Tone Horn.
F4:- Brakes Releasing.
F5:- On = Buffer Clash – Turn Off = Coupling
F6:-  No 2 End Tail Light (Non Driver End )**
F7:-  No 1 End Tail Light Mod. (Driver End)**
F8:-  On = Cab Door Open. Turn Off = Cab Door Close
F9:-  On = Dispatch Whistle – Turn Off = Driver Acknowledgement.
F10:-  Flange Squeal.*
F11:-  On Engine Running = Compressor.  On Engine Shut Down =Air Cylinder Drain Valve/ Pop
F12:-  Drive Hold. ( Old Notch up/Down) See a further explanation Below***
F13:-  Rail Clack.*
F14:-  No 1 End Cab Light ( Driver Fitted End) 
F15:-  No 2 End Cab Light (NON Driver End) 
F16:-  On=Fade Out (reduces sound Doppler effect to 25% Volume) Off=Back to normal setting
F17:- Brake 1 Option (Slows Loco down 50% Quicker) without using Speed Controller
F18:- Brake 2 Option (Slows Loco down 65% Quicker) without using Speed Controller
F19:- Brake 3 Option (Slows Loco down 85% Quicker) without using Speed Controller

• *Flange Squeal only operates at low speed turns off over 15mph

• ** A Loco can’t have Tails light lit when coupled to other vehicles this includes another Loco, wagons, coaches & brake vans. This was a punishable offence for the Driver on Main Line operation. Intermediate Tails lights on trains had a Special Bell Code for Signalman as this was termed as 2 Trains in 1 Section a sackable offence for the Signalman. 
This how serious this was in Railway Times right up to Power Signal Boxes taking over by using Track Circuit Block Signalling (TCB). 
This took away from most signalman to observe EVERY train had passed with Tail Light lit. Imagine a train becoming divided in a section then passing the Signal box the signalman saw the Tail Light of the Loco and allowed another train into this section with another part of the train still in the section. All retailers have always overlooked this apart from Bachmann having a flirt with switches under some chassis.

• Our Tail Light Mod, allows you to turn either end on/off using F6 & F7 on V5 Decoders and nothing to do with directional lights

• *** Drive Hold this replaces notching up & down which was quite hard for us to explain & Locked the Engine rev. Using Drive Hold Press F12 Nothing will happen until you select the speed you require. Still the Loco will not move until you turn off F12 the trick using this is to turn this off before MAX Revs are reached, if not the Loco revs will decrease back to idle. Once the Loco has set off you can increase the speed & engine revs as normal 
Please Note due to the need to keep these Functions to an acceptable level we have incorporated duel functions on F5 & F9 the down side to this option is that when the Power is turned on the track or the Loco is placed on a live track you will hear the Drivers Acknowledgement. We are slowly rolling out all V5 updates starting with Diesels

Weight Bracket= 0.75- 1.0Kg Postage Options Click Here.

Order Here.

Loco is the earlier 8 pin chassis model.

Click Here To Order.
Tel: 0114 3216 160 Or 0114 2647 449.